Pipe making machine is mainly divided into two major: one is a common high-frequency welded pipe machine, the other is a stainless steel pipe making machine, high-frequency welded pipe machine is mainly used for the production of a variety of iron pipe, water pipe, etc.;
And stainless steel pipe making machine is mainly used for the production of a variety of stainless steel decorative pipe, such as: staircase railing pipe, anti-theft doors and windows with the pipe, staircase railing with the pipe, guardrail, etc., but also the production of various kinds of automobile exhaust, heat ex-changer pipe, fluid pipe, edible pipe and so on. It can also produce all kinds of automobile exhaust pipes, heat ex-changer pipes, fluid pipes, edible pipes and so on.
Working Principle:
The working principle of the flexible pipe control machine: the strip material is introduced into the pipe welding machine through the loading machine, the strip material is extruded and shaped through the rollers, and then welded and rounded by argon arc welding with mixed gas protection, outputting the required length of the pipe, cutter mechanism cuts it off, and then it is straightened by the straightening machine. Spot welding machine is used for spot welding connection between strip heads. This type of pipe making machine is a comprehensive set of equipment to weld the strip material into pipe continuously and to calibrate and straighten it.
Pipe making machine maintenance:
Pipe making machine in the work of the role played by more and more attention, then how to effectively improve its efficiency? KINGREAL ROLL FORMER believes that know how to maintain the pipe making machine can realize the improvement of efficiency. The following pipe making machinery and share with you the maintenance experience of pipe making machine.
1. often check the oil level on the oil tank, the oil level shall not be lower than the specified value.
2. The fine oil filter needs to be replaced in time when it is blocked by dirt; the coarse oil filter should be cleaned in time when it is blocked, once in 3 months.
3. Add oil to the tank, must be filtered, the oil can not be mixed with water, rust, metal shavings and fibers and other impurities.
4. In winter or cold areas when starting the pump, should be opened and closed, repeated several times, so that the oil temperature rises, to be flexible hydraulic pump station operation before starting work.
5. All knobs on the hydraulic pump station should not be moved by non-operators.
6. Often observe whether the power supply voltage has abnormal fluctuations, and every 3 months or so overhaul.
The correct maintenance of the pipe making machine for the use of equipment efficiency and life plays a very positive role!