One of the more popular products in the suspended ceiling range, metal open cell ceiling is a suspended ceiling system made of metal materials such as aluminum alloy and stainless steel. It usually consists of a series of parallel metal bars or grids that form a structure with light transmission and ventilation. This type of ceiling design is not only aesthetically pleasing, but also improves the sense of permeability of the space.
Metal open cell ceiling suspended ceilings are widely used in a variety of scenarios such as airports, subways and shopping malls for features such as aesthetic appearance and sound insulation.
The standard of regular aluminum grille is 10mm and 15mm, while the height has several options such as 20mm, 40mm, 60mm and 80mm.
The grid size of open cell metal ceiling is 50*50mm, 75*75mm, 100*100mm, 125*125mm, 150*150mm and 200*200mm.
The regular sizes of sheet ceiling metal grid are 10*10mm, 15*15mm, 25*25mm, 30*30mm, 40*40mm, 50*50mm and 60*60mm.The smaller the pitch of the grille, the higher the price.
The common thicknesses of ceiling metal grid are 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm and 0.8mm, among other options.
Generally speaking, metal grid ceiling is made by Open Cell Ceiling Roll Forming Machine through uncoiling, leveling, punching, shearing and cold bending of metal materials, and different sizes of metal grille products can be produced by adjusting the spacing of punching holes or adopting different production lines.
KINGREAL ROLL FORMER, as one of the manufacturers of cold roll forming machine in China, can provide customers with different production requirements of Open Cell Ceiling Making Machine. KINGREAL ROLL FORMER, as one of the manufacturers of cold roll forming machine in China, can provide customers with Open Cell Ceiling Making Machine with different production requirements.
What are the installation processes?
1. Determine the height, use the inkwell to play the high level line on the wall;
2. Use the iron expansion bolts to fix the hanging bar on the top, and fix the light steel keel under the hanging bar to keep the level (if the grille span is not more than 3 meters, you don't need the hanging bar);
3. Use cement nails to nail the aluminum angle along the horizontal line;
4. Put the aluminum grille on the ground group spell complete;
5. put the group spell good grille ceiling on top of the aluminum angle iron, the middle position with fine wire directly tied to the light steel keel;