The Highway guardrail plate is a typical cold formed steel product, mainly produced by Highway Guardrail Steel Roll Forming Machine. KINGREAL highway guardrail forming machine can reach 5-8m/min, and the finished product rate is very high.
Highway guardrail plate is composed of two pieces of waveform steel guardrail plate and the two fixed clamping between the two columns, two columns fixed clamped between the two pieces of waveform steel guardrail plate.
In the normal operation of the highway, the guardrail suing the insertion and extraction of columns can be easily inserted into the opening of the pre-set inserted and extraction of holes, play a role in isolation and protection, and at the same time with the highway outside the edge of the guardrail on the belt echo, neat and tidy, beautiful supporting.
It has the advantages of good impact resistance, low cost, long service life, higher security, green environmental protection and so on.
Use: highway collision avoidance facilities, isolation and other facilities.
The continuous structure.
It utilizes the deformation of soil base, column and beam to absorb the collision energy.
Waveform beam guardrail is both flexible and steel.
Specification:
The common specification of two-wave guardrail plate is 4320mm×310mm×85mm×3/4mm, and the column is 114/140 mm×4.5mm.
The common specification of three-wave guardrail plate is 4320mm×506mm×85mm×3/4mm, and the column is 130mm×130mm×6mm.