Cold roll forming machine is through the sequential configuration of the multi-channel molding roll, the coil, strip and other metal sheets and strips constantly transverse bending, in order to make a specific cross-section profiles of plastic processing technology machinery. Rolls using C12MoV material is to take advantage of its wear resistance, but the specific strength and hardness is contradictory, heat treatment to take advantage of the red hardness of C12MoV, quenching, two or even three times tempering to achieve hardness. In the process of use, the surface of the cold bending machine if not properly protected is very easy to rust, which is not only unattractive, but also affects the service life of the cold bending machine equipment.
Recent popular cold roll forming machines include Drywall Stud And Track Roll Forming Machine, Ceiling T Bar Roll Forming Machine, Ceiling Channel Roll Forming Machine And Cable Tray Forming Machine.
So is there a good way to prevent cold forming machine equipment from rusting?
Apply anti-rust paint
We can apply anti-rust paint on the surface of the cold bending machine equipment, anti-rust paint color has a variety of, can use red, green or silver, are quite beautiful. After painting can not only prevent the cold bending machine rust, but also decorative effect.
01
Enhanced care type
Cold bending machine paint before the surface with Angle Maro machine mounted on the steel wire grinder carefully polished, which is to remove the rust completely clean, and then is to paint, and then brush the rust paint, so it will be more solid.
02
Plating or heat treatment
Electroplating treatment of key components, such as galvanization, chromium plating, etc., to increase the ability to prevent rust. Adopt heat treatment process, such as bluing treatment, blackening treatment, to enhance the corrosion resistance of components
03
Nano antirust paint
In today's modern society, there is a high-tech paint, called nano antirust paint, which can not only protect against rain and seawater, acid and alkali, but also prevent ultraviolet light. And very suitable for cold bending machine equipment.
04
Choose to place the site
Cold bending machine should be in a dry and ventilated place, not suitable for damp environment, which is also one of the ways to prevent the cold bending machine rust.
05
Different Type Roll Forming Machine Display
Storage Shelving Back Panel Machine
Shelf Rack Upright Post Making Machine
Shelving Slotted Angle Making Machine