Cable tray roll forming machine is a kind of common equipment used to produce cable tray. KINGREAL cable tray making machine can improve the production efficiency and quality of cable tray, widely used in electric power, communication, construction and other industries. However, due to the frequent use, cable tray machine will also appear some common faults, which bring some trouble to the production. Below, KINGREAL ROLL FORMER will elaborate the common failures and solutions of cable tray machine from several aspects.
1. Machine failure
Machine failure is one of the common problems of cable bridge molding machine. For example, the equipment can not start normally, lose step in the work or abnormal sound and so on. These problems may be caused by damaged or aging machine parts, power supply failure and other reasons.
There are various ways to solve these failures. First, you can carry out timely maintenance, regular inspection of all parts of the equipment, and timely replacement of aging or damaged parts. Secondly, we should pay attention to avoid the use of unsuitable power supply or prolonged overloading of the equipment, so as not to damage the equipment.
2. mold damage
Mold is one of the key components of the cable tray molding machine, which is used to press the raw material into the required shape. However, due to prolonged use or improper operation, the mold is easily damaged. For example, wear, deformation, fracture and so on.
In order to reduce mold damage, the following measures can be taken. Firstly, carry out standardized operation to avoid excessive pressure or impact to the mold. Secondly, regular maintenance of the mold, timely cleaning of the mold surface dirt, and lubrication. In addition, for a long time to use the mold, to have a regular replacement plan, so as to avoid damage to affect production.
3. Electrical problems
The operation of the cable tray molding machine requires a stable power supply and a suitable configuration of electrical parameters. If there is a problem with the electrics, it may lead to the machine not working properly and even jeopardize the safety of the operator.
To solve electrical problems, the following measures can be taken. First, it is necessary to ensure that the equipment receives a stable and reliable power supply to avoid excessive voltage fluctuations or frequent power outages. Secondly, for the electrical parameter configuration, it should be adjusted according to the requirements of the equipment to ensure that the equipment works in a safe and reliable range. In addition, the equipment should be inspected regularly to find and repair electrical problems in time.