The reason for the scratching of the roof sheet rolling machine is mainly related to the early debugging. Generally speaking, for the tile press equipment purchased, the color steel tile press manufacturer will send debugging personnel to help operate and debug it.
If the problem lies in the debugging error, you can directly contact the color steel tile press manufacturer to adjust and retest until the problem is solved.
The reason why the roof sheet rolling machine causes the bottom wheel to be painted is the problem of the bottom wheel. On the one hand, it may be affected by some excess things.
Just imagine, there are some irrelevant sundries shaking beside the high-speed bottom wheel, how can there be no problem. On the other hand, the distance between the wheels is too narrow and the friction is too large. If this is the problem, how to solve the problem of painting the bottom wheel of the tile press?
It is very simple, it is to increase the gap between the upper roller and the lower roller. Generally speaking, if the gap is increased, the friction will be reduced, and the problem of scratching will be solved naturally.
There is another possible cause of scratching. After some color steel tile forming machine run for a long time, the bottom wheel will loosen and shake back and forth, which is the result of the larger deviation. If it is for this reason,it can be solved by adjusting the deviation.
KINGREAL manufacturer warmly reminds all friends who operate the roof sheet rolling machine that if the bottom wheel is painted, remember not to panic.
The first thing to do is to check the problem and make a record of the inspection, so as to facilitate the debugging staff for debugging reference. In addition, pay attention to protecting the color steel tile press equipment during use to reduce the probability of problems.