The main power supply must be cut off before maintenance of the C channel roll forming machine, and the parts cannot be disassembled at will. When doing maintenance work, you must stand on the plastic blanket and wear safety gloves and overalls.
In addition, the acceptance of C channel roll forming machine should pay attention to the accuracy of the measurement of the equipment and check whether the quality of the equipment meets the standard.
Check the automatic production, the unqualified will affect the production of the product, and then I will introduce the detailed content for you.
1. Maintenance measures for C channel roll forming machine
Ø When performing maintenance on the roll forming machine, the power supply on the machine must be cut off from the external power supply, and no live operation is allowed.
Ø Unless you know enough about the equipment, don't disassemble any parts of the roll forming machine at will.
Ø Do not touch the wire connectors that may be exposed to the outside world or other components that have wire connections and are not loose. Before disassembling or moving the protective device on the C channel roll forming machine or replacing the components, the power supply must be cut off.
Ø Try to stand on the plastic blanket for maintenance work. Never perform maintenance work on the cold bending machine on a flooded floor or in a very humid environment.
Ø You must wear safety gloves, goggles and long-sleeved overalls when performing maintenance on the roll forming machine to avoid burns on parts of the body by high temperature or burns on the surface of high temperature components.
2. what should be paid attention to in the acceptance of cold-formed light steel frame?
Ø Measure the accuracy of molded products. Product accuracy is a key indicator of whether the entire equipment is qualified.
The accuracy indicates whether the roll design of the cold-formed light steel keel equipment is qualified, or whether the commissioning is successful. These two items, any unqualified ones, should be dealt with first by the manufacturer.
Ø Inspect whether the equipment material and electrical appliance brand comply with the contract. The material mentioned here is mainly the material of the cold-formed roll. The roll material is used well, and the treatment process is passed, the life time of the whole set of equipment will be long.
The brand of the electrical appliance determines the stability of the circuit control system, and it should be produced in strict accordance with the brand specified in the contract.
Ø Automated production inspection. If the continuity of automated production is not good, it will affect the efficiency of production, or even make it impossible to produce at all. Therefore, it is necessary to buy more steel belts to test machines in the production plant.
Ø Inspection of punching dies and cut-off dies. Check whether the punching and cutting meet the standard, and check whether the burr is too large. Check whether the material of the mold is qualified.
The above is an introduction to "Maintenance measures for C channel roll forming machine, what should be paid attention to", I hope it can help you.