Before using the glazed tile machine equipment, you need to check the various parts of the roller assembly to see if they are tightly locked. After the connection between the bolt and the nut, ensure that the locking is not loose. Before starting the commissioning of the glazed tile machine.
In order to ensure the normal and efficient operation of the glazed tile making machine, the following points need to be paid attention to:
l It is necessary to ensure that the assembly of the various components is normal before starting to assembly the mold. In the process of assembling the mold, be sure to cut off the power supply, and manually cooperate with the motor to assemble the chain and sprocket into the roller assembly of the main body. When installing the spindle, two people are required to cooperate to avoid unnecessary wear and installation errors.
l The mold assembled by the glazed tile making machine requires the combination of the above mold and 6 lower molds of matching sizes. The first is the matching of the upper and lower molds, and the lower molds are fixed to the worktable. Configure the backing plate that must be prepared, and after the upper mold and the lower mold are fixed, check whether the spacing between the upper and lower mold cutters has reached the pressing tile thickness required by the glazed tile making machine. If it is correct, the remaining upper and lower molds can be assembly is completed, the overall test machine inspection can be carried out.
l Before the official start-up, pay more attention to whether the lubricating oil in the transmission parts such as the chain and sprocket is sufficient. After starting up, carefully check whether there will be any unusual noises, frictions, etc. When the glazed tile making machine starts up and running. Whether the operation between the various connecting parts is smooth and error-free.
Hope the content of this article can help you.