There are many types of through cable trays, including through type and ladder type. These bridges are generally widely used on the supports of various buildings and pipe galleries. Which can produced by Cable Tray Making Machine.
Although the structure is very simply, due to the use of stainless steel, the specific function of each type of stent are different.
1. Trough Cable Tray:
The trough cable tray is a fully enclosed cable tray, which is most suitable for laying computer cables, communication cables and control cables of other highly sensitive systems.
It has good effect on the shielding interference of control cables and the protection of cables in heavy corrosive environments. The shield of the through cable tray is supplied with the through body.
The slotted cable tray is generally a closed type of tray without openings, so it is poor in heat dissipation, while the tray-type tray similar to it has many waist-shaped holes at the bottom, and the heat dissipation performance will be relatively better.
2. Ladder bridge
Ladder bridge is a new type improved by enterprises based on relevant domestic and foreign materials and similar products. It has the advantages of light weight, low cost, unique shape, convenient installation, good heat dissipation and good air permeability. It is diameters in general, especially for the laying of high and low voltage power cables.
The ladder type cable tray is equipped with a protective cover, which can be specified when ordering when a protective cover is required.
The ladder-type bridge has arc-shaped bends: bends, three-way, four-way and other structures are arc-shaped with beautiful appearance, the inner bending radius is R200-900mm, and the cable bends a natural transition, avoiding the breakage when the cable is bent, and can increase the strength of the cable tray.
The product of the ladder bridge is lighter in weight, which is more convenient and quick ti install during the construction and in-loading process will also be faster.
Therefore, in the construction, if the quality is relatively light, it can make the construction of the construction unit more convenient. Secondly, for the construction, the installation is also necessary. Thirdly, it is necessary to ensure that the product has a good shape, only in this way can the construction effect be guaranteed good.
With the great development of national economic construction and industrialization, there are multiple demands for product diversification and further improvement of the characteristic of ladder bridges, and it is expected to have a good development prospect in the future.