In order to allow you to better budget how much workshop you need to rent before buying equipment, we will introduce you to the calculation of some conventional cold roll forming machines. The area of the equipment will be produced according to the degree of automation. The area of the equipment will be produced according to the degree of automation. The thickness of the material has a certain relationship, the thicker the material, the longer the buffer zone required.
The following describes the area occupied by several specifications of equipment. Of course, the following calculations can only give you a rough data, because different equipment, the number of grounds of the host will have different lengths, and other punching, leveling, receiving, cutting, welding and other lengths are similar.
Below, we distinguish the calculation of the area according to the different functions of the equipment.
1. The area occupied by the model with the function of discharging-forming-receiving:
The actual width of the whole set of equipment is about 1 meter, and the length is: unwinding (1.5 meters)-forming (6-15 meters)-rewinding (3 meters). A buffer zone of 3-4 meters is reserved between each function. The total length is about: 16 meters.
2. The area occupied by the model with the function of discharging-punching-forming-receiving:
The actual width of the whole set of equipment is about 1 meter, and the length is: unwinding (1.5 meters)-punching (2 meters)-forming (6-15 meters)-receiving (3 meters), with 3-4 meters reserved between each function of Buffer zone, the total length is approximately: 20 meters.
3. Unwinding-leveling-punching-forming-receiving function model area occupied:
The actual width of the whole set of equipment is about 1 meter, and the length is: unwinding (1.5 meters)-leveling (1.5 meters)-punching (2 meters)-forming (6-15 meters)-receiving (3 meters), each function
A buffer zone of 3-4 meters is reserved between, the total length is about: about 25 meters