Most of the current production models are mechanized production, such as metal forming in particular. Now the technology is more and more developed, and shelving panel making machine is also becoming more and more popular. For example, some variants have gradually begun to be popularized, such as shelf forming equipment, which is specialized in metal processing for the production of rack structures.
What needs special attention in the process of using shelving panel making machine?
1. Choose a flat surface and stabilize the machine. The feet of the chassis can be opened to make the machine panel easy to investigate.
2. Insert the plug on the handheld sensor head into the socket on the panel and screw it tightly. Pay attention to the positioning gap.
3. Insert one end of the plug of the power cord into the socket on the rear panel of the chassis, and the other end into the power supply socket. Be sure to use a single-phase three-wire power supply.
4. Turn on the "main power switch" on the rear panel of the chassis, press the "power switch" button on the panel, and the machine can work when the "ready" green indicator light is on.
5. Press and hold the "Setting Button" key to set the appropriate value, generally between 0.5-2.0 seconds.
6. Place the sensor head on the container lid and press the start button on the handle. At this time, the "heating" red indicator light is on, indicating that it is heating, and the induction head should not be removed, and the "HEATING" red indicator light is off before removing the induction head. After the "ready" green indicator light is on or the buzzer in the machine beeps a short "beep", the next container can be sealed.
7. Check the sealing quality, according to different raw materials, diameter of the container and production power, properly trim the "setting button" to make the sealing quality better.