Aluminum-magnesium-manganese plates are widely used in airport terminal buildings, aircraft maintenance depots, stations and large-scale transportation hubs, conference and exhibition centers, stadiums, residential buildings and other building roof and wall systems, etc., and they are receiving more and more attention , Then how to choose the correct aluminum-magnesium-manganese board?
What is the difference between the high standing edge and the low standing edge in the aluminum-magnesium-manganese plate material?
It is clear to the industry that aluminum-magnesium-manganese panels are mainly divided into two types: high-standing edges and low-standing edges (this is the same as the floor decks, which are divided into openings and closed ends). The high-standing edges and low-standing edges are just some of the industry. It is called, its scientific name should be vertical single seam and vertical double seam. The rib height is 65mm and 25mm respectively, and the commonly used models are 400 and 430.
These two kinds of aluminum-magnesium-manganese alloy plates are also widely used in modern buildings. The main differences between the two are discussed below.
1. Waterproof
In terms of waterproofness, the high-rise side aluminum-magnesium-manganese board has more advantages, which is determined by the height of the ribs, and the high-rise side occludes rainwater more difficult to penetrate.
2. Aesthetics
From the outside, the low standing side aluminum-magnesium-manganese board is more beautiful than the high standing side.
3. Use
Under normal circumstances, the purpose of the two is the same, both are used for roofing, but in the case of no special requirements, low-rise side aluminum-magnesium-manganese roof panels are more used for private use, while high-rise side aluminum-magnesium roof panels Manganese plates are used more in gymnasiums.
4. Economy
In terms of price, the high-side aluminum-magnesium-manganese board is more expensive than the low-side aluminum-magnesium-manganese board, which is mainly caused by the different feed width.
What can I do to buy cost-effective aluminum-magnesium-manganese roof panels? Is there any difference in material and model of aluminum-magnesium-manganese board?
There are also models of aluminum-magnesium-manganese alloy roof panels, which are divided into vertical single seaming (that is, 65mm wave height) and vertical smooth seaming (25mm wave height). Like the vertical single seaming aluminum-magnesium-manganese alloy roof panel, the main models are yx65- 300, yx65-400, yx65-430, yx65-500 several models. Different models have different prices due to different effective utilization rates. For example: Compared with yx65-500, yx65-300 is more expensive than yx65-500 when the thickness and material are the same. In addition to models, aluminum-magnesium-manganese alloy roofs are also made of materials. Commonly used materials are 3003 and 3004. The market price of 3004 is more expensive than 3003 because the material contains aluminum, magnesium, and manganese.
How to choose aluminum-magnesium-manganese alloy roof panel support?
Here is a formula: T=H-W1-W2 (where T represents the height of the support, H represents the total height, W1 represents the distance from the aluminum-magnesium-manganese roof panel to the bottom of the support, and W2 represents the aluminum-magnesium-manganese roof panel The distance to the insulation cotton.
As a manufacturer of roof tile forming machines, KINGREAL can give you advice on many aspects of product selection and machine production principles. Feel free to contact us!
