How To Manufacturing The Drywall Stud And Track?
The common sizes of drywall partition profiles are generally 75mm and 100mm, and the keel spacing cannot be greater than 420mm. In addition, before the installation of the drywall partition profiles, which is produced by Metal Stud And Track Roll Forming Machine the contact parts should be treated and leveled first, and the connection should be made.
The detailed content will be introduced below.
Common size of drywall partition profiles:
1.The commonly used light steel frame specifications for partition walls are generally 75mm and 100mm. This specification determines the thickness of the partition wall, and the length is generally 3m and 4m. The thickness of gypsum board is usually 9.5mm, 12mm, 15mm, and some thickness is below 9.5mm, but it is generally non-standard; The length is 2400mm, 3000mm, and the width is mostly 1200mm.
2.Generally, the gypsum board on both sides of the light steel frame is partitioned and the thickness of the putty is 10cm thick and the thickness is 11cm. The general frame thickness is 7.5 cm, and the thickness of the double-sided double-layer sealing plate (1.20 cm) of the 75 types light steel keel partition wall is 9.90 cm.After the paint is done, the wall thickness is greater than 10cm. The wall thickness of 100 type and 150 type light steel keel partition wall can be deduced by analogy.
3. The structure of the light steel frame is not static, and sometimes it is necessary to add through and strengthen the keel during the construction; The vertical keel spacing should be determined according to the width of the gypsum board. Generally, one is placed on the side of the gypsum board and one in the board. The spacing is not more than 600mm; when the wall decoration layer uses ceramic tiles and other materials, the weight will increase, at this time the keel spacing cannot be greater than 420mm. If the height of the partition wall is to be increased, the distance between the keels should be reduced accordingly.
Installation steps of drywall partition profiles:
1.Before installing the top keel along the ground, the contact part with the keel should be smoothed. For example, to make a concrete skirting board, the countertop needs to be smoothed with cement mortar. Because the skirting board has a small width, it is generally about 100mm.
2.When installing the top keel along the ground, it is necessary to paste two long neoprene strips or foam plastic strips on the back of the keel. The bonding method is to use a double-sided adhesive tape with a width of 10 cm, and stick a section of tape every 500 mm or so, and then paste the neoprene strip on the tape.
3.When installing the keel along the top to connect with the concrete components, M5x35mm nails are generally used, and the nail gun is used for installation. In order to prevent the nails from penetrating the keel, a 30mm x 30mm steel plate block with a thickness of 2mm should be added to each nailing position. The installation along the top keel can also use expansion bolts or pre-embedded wooden bricks to connect with wood screws.4.When installing the C-shaped vertical keel, insert the upper and lower ends of the vertical keel into the top keel along the ground, adjust the size according to the requirements, accurately position, and require vertical placement.
On each vertical keel, there are reserved H-shaped cut square holes at a certain distance along the length of the keel, which can be temporarily opened during the installation process to provide threading and pipe threading in the partition wall.
If you want to know more about the drywall partition profiles, you can also visit our official website to learn about related machines.