What is the appropriate thickness of baffle ceiling in mm?
Commonly used U baffle ceiling which is produced by Baffle Ceiling Making Machinethicknesses are 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 01.1mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 5.0 mm.
Of course, it can also be customized according to actual needs.
Recommended thickness of baffle ceiling:
1.40*80mm is a more commonly used baffle ceiling specification and size combination.
If there are certain requirements for product quality, it is recommended that the thickness of the acoustic baffle ceiling is above 1.0mm, and 1.0mm is the most suitable thickness for 40*80mm.
The thickness can make the product bend angle beautiful, strong sense of line, and the price is more suitable. The length is recommended to be about 4 meters in length.
For projects that require high thickness, it can be 1.5mm or 2.0mm thick, and the length can be 6 meters. Of course, the thickness of the baffle ceiling of 2.0mm will be more expensive than the thickness of 1.0mm.
Therefore, if the product quality and price are relatively balanced, it is best to choose a thickness of 1.0mm.
2. With an inner bottom width of 50mm and a height of less than 100mm, the thickness of the U baffle ceiling can be 1.0mm.
If the height exceeds 100mm, you need to look at the bottom width and height.
The thickness of the conventional flat aluminum square pass is generally not more than 1.5mm, which exceeds the thickness of 1.5mm. Because it is easy to cause the R angle rolled out by the machine to be relatively large, it is not very attractive.
Therefore, in general, the height of the baffle ceiling should not be too high, preferably within 300mm.
The larger the specifications of the U baffle ceiling, the thicker the thickness must be correspondingly to ensure the quality of the baffle ceiling
Of course, if you want to have a good product, you cannot do without a good product production machine. The KINGREAL Baffle Ceiling Roll Forming Machine is a good choice.