The shelf column equipment is a special forming equipment for the production of shelf columns. Servo feeding, online punching, and automatic cut-to-length cutting. Let's explain what are the operating procedures of the shelf column equipment, so that everyone can clearly understand and learn and understand And master.
The operating procedures of rack column equipment, its main contents are:
(1) The pressing speed should be adjusted according to the performance of the processed material and the processing curvature to make it suitable.
(2) During the processing, avoid the workpiece from breaking and flying out, so as not to hurt people.
(3) The relevant operators should undergo special training, otherwise they cannot operate the rack column equipment.
(4) During work, operators should concentrate their attention, work hard, and cannot do things unrelated to work.
(5) Before using the equipment, check that there are no obstacles around it, and remove it in time if any.
(6) If it is operated by multiple people at the same time, the rack column equipment must be directed by a special person.
(7) The operator must not perform dangerous actions, such as placing his hands between the roller of the discharge rack and the workpiece.
(8) Processing should be carried out according to some actual conditions and requirements to avoid excessive processing.
(9) After the work is completed, clean the equipment and clean the workplace.
(10) The processed objects should be placed in the designated position and placed neatly.